Series of liquid or powder degreaser/dephosphatizer. For more details see ”Cold forming” section.
Alkaline powder product. It is used to degrease and simultaneously remove oxides, phosphates and iron oxalates. Since it contains high amount of sequestering agents it also eliminates drawing soaps rich in calcium.
Slightly alkaline powder product. Suitable for any metal, free of caustic alkalis, phosphates and silicates.
Slightly alkaline powder product. Suitable for any metal, free of phosphates and caustic alkalis.
Alkaline liquid product.
Rich in carbonate, it is mainly used in removal of animal and vegetal oils and greases.
To be used also by spray.
Slightly alkaline liquid product. Suitable to degrease copper and alloys also for quick operations in line. To be used also by spray.
Slightly alkaline liquid product. Suitable for degreasing of copper alloys also for quick operation in line. It avoids hydroxides precipitation and is chosen when a passivation with triazoles follows. To be used also by spray.
Slightly alkaline liquid product.
Free of silicates, it can be used on any metal.
It is mainly used in degreasing of light alloys where silicates are not allowed.
To be used also by spray.
Neutral liquid product. It is used to degrease, brighten up and protect surfaces. No following rinse required. Condorine 149 CM is used in immersion systems while Condorine 149 SP is used in spray systems
Alkaline liquid product. Suitable for degreasing and simultaneous removal of drawing stearates and oils. it can be also used in electrolytic plants both in anodic and cathodic current.
Isoparaffinic solventes based product, emulsifiable, for cold degreasing of pieces highly contaminated with oils and greases.
Alkaline liquid product suitable for cleaning of any metal usable by dip and spray.
Strong alkaline desgreaser used also in dephosphating of carbon steel and etching of aluminium and alloys.
Alkaline liquid product. Rich in sequestering agents for aluminium.
It is used to clean die casting, pressure die casting and pressing moulds.
Slightly alkaline liquid product. Suitable for spray and immersion application for non etching cleaning of the aluminium surfaces.
Slightly acid liquid product. Innovative product alternative to phosphodegreasing. It degreases the surfaces by forming a conversion layer that protects the surfaces and increases the rubber bonding capacity. Free of phosphates, it avoids problem of sludge formation and phosphate abatment. Suitable on any metal in spray and immersion plants.
High performing degreaser used for chemical and electrolytic degreasing
Slightly alkaline degreaser to be used to clean surfaces from oils and zinc oxides. The product is mainly used in the cleaning of coils prior to coating.
Mild alkaline degreaser to be used at medium low temperature. It does not saponify rolling oils of animal or vegetal nature avoiding foam formation
Slightly alkaline product used to degrease aluminium surfaces. High content of buffering and inhibiting substances avoid the metal surface etching
Slightly alkaline degreaser for in line spray cleaning of stainless steel surfaces before annealing process. The product is totally free of salts and avoid stains formation in the annealing step
Acid degreaser, free of phosphoric acid, for stainless steel, for spray application. The product also carries out a pickling action on light oxidations.
Acid degreaser for stainless steel, free of phosphoric acid and surfactants, for spray application
Acid degreasing/etching agent for preparation of aluminium and light alloys to painting in spray plants.
Acid degreaser for preparation of aluminium and light alloys prior to painting in spray plant. It carries out also a slight etching action.
Low alkaline product, compatible with profiling emulsion, for cleaning of coils from slitter in tubesplant.
Alkaline product for the continuous degreasing of coils and the simultaneous etching of aluminum and/or galvanized surfaces.
Medium alkalinity liquid product for degreasing of all metal surfaces, light alloys included.
Medium alkalinity product to remove though oils from steel and copper alloys.
Low alkalinity liquid product to be used for degreasing and simultaneously protection of carbon steel. No rinse.
Slightly alkaline liquid product to replace strong caustic blend working at lower temperature and with a higher degreasing power.
Solvent based acid product to be used as delivered or emulsified in water to remove particularly though oils.
Neutral degreaser used on all metals, it is free of alkaline compounds. Mainly used for mineral oils removal.
Highly concentrated and rinseable degreasing product. It can be used on all metals. Available in SG 515 BT version for use at low temperatures (30-40°C).
Highly alkaline liquid degreaser used to degrease the surface before an electrolytic deposition, a chemical conversion process, enamelling or brightening.
Interoperable liquid degreaser for carbon steel and stainless steel. Suitable for applications in single-stage washing machines. It has a strong protective power.
Highly concentrated acidic degreaser, sulphuric acid based, for the cleaning and etching of alumium and aluminium alloys surface
Acid degreaser mainly used in processes followed by acid etching, compatible with the product.
Slightly alkaline degreaser, it is used to clean the surfaces from oil and zinc oxides. The formulation is mainly used in cleaning of coils on aging and pre-painting lines
Neutral degreaser. It is mainly used in washing and mechanical deburring processes at high pressure (up to 500 Bar).
© Copyright 2024 All Rights Reserved