Concentrate liquid product for phosphodegreasing. Standard product used to treat steel surfaces with moderate contamination also in no rinse process to
Liquid product for phosphodegreasing. Standard multi metal product used to treat mixed material with a moderate contamination. It is used on steel, aluminium and galvanized steel.
Liquid product for phosphodegreasing. Standard product used to treat iron surfaces with moderate contamination.
Liquid product for phosphodegreasing. Standard product used to treat surfaces with moderate contamination. It has a higher free acidity that CONDORFOS K 12 L.
Liquid product for phosphodegreasing. Product rich in degreasing agents used to treat highly contaminated steel surfaces.
Multimetal liquid product for phosphodegreasing. It is used in lines that treat mixed material with moderate contamination. It is used on steel, aluminium and galvanized steel.
Multimetal liquid product for phosphodegreasing. Similar to K 16L it is used on lines treating mixed material highly contaminated. It is used on steel, aluminium and galvanized steel.
Liquid product for high thickness phosphodegreasing. Used to degrease and to create a ”heavy” amorphous iron phosphate layer on steel aluminium and galvanized steel, also highly contaminated.
Powder product for phosphodegreasing. Standard product used to treat steel surfaces with moderate contamination.
Liquid product applied on steel, zinc, aluminium and its alloys to degrease and simultaneously form a thin layer of phosphates over the surface also in single stage plants.
Powder product for phosphodegreasing. Standard multi metal product used to treat mixed material with a moderate contamination. It is used on steel, aluminium and galvanized steel.
Liquid product, very concentrate, used to degrease and simultaneously remove oxides, sub oxides like rust, calamine and laser cut with formation of a thin phosphate layer on steel. Excellent to remove oxides and residuals by laser cutting
Liquid product used to degrease and simultaneously form a thin layer of iron phosphate on ferrous material with very dirty surfaces.
Liquid product for high thickness phosphodegreasing. Used to degrease and to create a ”heavy” amorphous iron phosphate layer on steel, aluminium and galvanized steel, also highly contaminated. Similar product to K 19 L but stronger.
Condorfos K28 is a pre paint self accelerated ferric phosphatizer to be used by spray on free of oxidation steel, light alloys, galvanized steel.
Etching additive for aluminium and galvanized steel to be added to phospodegreasing baths
Surfactant based liquid product. It can be added at any degreasing product to increase its detergent capacity in dip plants.
Surfactant based liquid product. It can be added at any degreasing product to increase its detergent capacity in spray plants.
Heavy layer multimetal phosphodegreaser. It is recommended for zamac alloys
Acid additive to increase the etching power on aluminium, galvanized and light alloys.
Additive for pH corrections. AL 14 Additive is used to correct the pH of nanotechnological conversion baths ( i.g. EC930 baths).
© Copyright 2024 All Rights Reserved