Free of hydrofluoric acid pickling agent, suitable for austenitic rods pickling. The pickling process with such a product must be followed by a final passivation stage with Descal P61.
Organic and inorganic based acid product, free of sulphuric, phosphoric, nitric and hydrofluoric acids. It is used to remove light oxidations and for iron decontamination of austenitic stainless steel as well as for pickling and iron decontamination of ferritic stainless steels.
Nitric and hydrofluoric acid based traditional pickling agent. It removes also eventual oils and greases that should be present on the surface.
Liquid pickler for stainless steel. It is the least aggressive of the series, mainly used when a reduced satin finishing of the metal surface is required. Application by spray.
Highly acid gel product. Standard product, it meets main needs of the field. It can be used for stainless steel. Application by brush.
Active pickling fluid gel, free of nitric acid. Low pressure spray application.
Strong pickling fluid gel, nitric and hydrofluoric acid based. Low pressure spray application.
Formulation based on sulfuric acid, with the addition of wetting and leveling agents, for the electrolytic pickling of stainless steels.
Acid product to remove inorganic residues after alkaline degreasing before white annealing. Free of phosphoric acid, it prevents alloys with high content of nickel from darkening. Compatible with pickling baths. Product is used also for welded ferritic stainless steel tubes pickling.
Balanced acid product for stainless steel pickling with nitric free solutions to be used combined with our Oxydizer OX 53.
Traditional nitro hydrofluoric acid based pickling product. Under appropriate operating conditions the product creates a smooth attack useful for cold forming oil anchoring
Pickling gel for stainless and special steel. Application by brush
Pickling agents for stainless steel. They are the evolution of Descalinox P13 FAST and Descalinox P 14 FAST being classified, for toxicity, in cat. 2 instead of cat. 1.
Additive for DESCALINOX serie, nitric acid free stainless steel pickling baths, to increase the treatment speed.
Product with hydrofluoric acid at high concentration for pickling of stainless steel with nitric free solutions. To be used combined with our OXYDIZER OX 53 and sulfuric acid
Acid product for pickling and polishing of stainless steel parts in vibrofinishing devices.
Activated product for preparation of baths for stainless steel nitric free pickling.
Evolution of the previous P13 and P14, they contain special additives that accelerate the pickling speed, reducing the treatment times. To be used combined with our Oxydizer OX 53.
Acid product, with low content of hydrofluoric acid, for pickling of stainless steel with nitric free solutions. To be used combined with our OXYDIZER OX 53.
Traditional nitrohydrofluoric balanced product for pickling of stainless steel.
Traditional nitrohydrofluoric gel for hand pickling of stainless steel.
Ferric salts concentrate for activation of pickling solutions free of nitric acid.
Nitric and hydrofluoric acid free pickling agent for AISI 400 or to eliminate light oxides from AISI 300 and the inorganic charges contained in the lubricants.
Balanced acid product for stainless steel pickling with nitric free solutions to be used combined with our Oxydizer OX 53.
New pickling agent used for the treatment of ferritic, martensitic and alloys containing sulfur. Using Descalinox P25 it is possible to eliminate costly and consuming over time pretreatment processes like shot blasting, permanganate and melted salts.
New formulation for electrolytic pickling based on organic acids, labeled as irritant only, ideal for applications within production areas.
Nitric acid free product for austenitic stainless steel and duplex alloys pickling. To be used combined with our Oxidizer OX 53.
Nitric-free product for pickling and satin finishing of stainless steel surfaces. The satin effect allows to create a homogeneous etching, useful for oil pick up in cold deformation processes such as drawing and moulding.
Product based on hydrogen peroxide for the control of the redox potential in the pickling processes of stainless steels.
Pretreatment product for martensitic and ferritic steels on replacement of melted salts/sand blasting/permanganate.
© Copyright 2024 All Rights Reserved