Aliphatic synthetic isoparaffins based evaporable product to be used emulsified in water for stainless steel and carbon steel tubes and bars straightening. It leaves a dry to touch surface.
Degreaser lubricant for last drawing step, hydrosoluble, vegetable soaps based. The product leaves a clean and bright wire and, thanks to its high detergent capacity, it can be used also only as detergent.
Chlorine free, synthetic lubricant for drawing of high alloys and stainless steel rods and tubes.
Chlorine free synthetic lubricant for drawing of stainless steel rods and tubes.
Chlorine free synthetic lubricant for drawing of carbon steel rods and tubes.
Chlorine free synthetic lubricant for drawing of high alloys and stainless steel bars and profiles.
Lubricant polymer in aqueous emulsion for cold forming of carbon steel alloyed
Synthetic, water soluble lubricant for wet drawing of wires of any metal.
Special fluid with additives, designed for Yellow alloys drawing, extrusion and stamping. Condorlube TR 4 SB contains protectives and inhibiting additives.
Non-reactive water based polymeric lubricant, for cold forming of carbon steel and stainless steel and non-ferrous materials. Compared to the traditional polymeric lubricants, it is suitable for high reductions.
Deep forging paste for stainless steel. Thanks to its special additives, guarantees good results in high pressure processes.
Alkaline dry lubricant, with an inorganic base, is applied to the coil to prepare it for subsequent cold forming operations.
Lubricant based on chloroparaffinic compounds. It is used in high alloyed stainless steel cold forming.
Water-soluble coolant, based on vegetable soaps, it is primarily used to replace the classic emulsions in molding and shearing operations.
Evaporable lubricant, based on isoparaffins, is mainly used in light cold forming operations.
Water soluble coolant finds primary use on ultrasonic testing lines of pipes. Compatible with all metals.
Mineral oils based lubricant, with additives with sulfur compounds, for the drawing and calibration of wires, rods, bars and pipes in high-alloy carbon steel.
© Copyright 2024 All Rights Reserved